Wireless Module Product Design
Leave a message
When wireless modules are used in industrial control projects, communication issues may arise due to interference. Co-channel interference occurs if devices operating at the same frequency are nearby; this can be resolved by adjusting the wireless module's frequency or changing its installation location. Since wireless transmission relies on electromagnetic waves, obstacles can cause signal attenuation; therefore, a clear line of sight between antennas should be ensured during installation.
Four key parameters must be considered when selecting an antenna. The antenna's frequency band must match that of the wireless module. Gain is measured in dBi; a higher value indicates greater signal amplification. The Voltage Standing Wave Ratio (VSWR) indicates impedance matching; while the ideal value is 1, the actual value should be below 1.5. Different operating environments require different antenna types-for instance, high-gain external antennas are suitable for harsh environments.








